AMD Geode™ LX DB800 Windows® CE 5.0 OEM Adaptation Layer Driver Release Notes Version 1.01.06, General Release November 28, 2005 -------------------------------------------------------------------------------- PRODUCT INFORMATION -------------------------------------------------------------------------------- This OAL (OEM Adaptation Layer) is based on the AMD Geode™ LX processor and 486 OAL shipped with the Platform Builder. Power Management is supported in the OAL through a BIOS/Loader call. Features -------- - Support for S1 or S3 suspend options. - Support for serial and Ethernet KITL. - Seamless suspend/resume across multimedia playback. - OHCI USB support including proper handoff between legacy and interrupt-based operation. Dependencies ------------ WinCEPB50-041231-Product-Update-Rollup-X86 WinCEPB50-050331-2005Q1-X86 WinCEPB50-050630-2005Q2-X86 WinCEPB50-050706-KB896664-X86 WinCEPB50-050719-KB902398-X86 WinCEPB50-050726-KB904426-X86 WinCEPB50-050727-KB904383-X86 WinCEPB50-050805-KB904255-X86 WinCEPB50-050708-KB902334-X86 WinCEPB50-050722-KB896340-COMMON WinCEPB50-050727-KB901207-X86 WinCEPB50-050729-KB892204-X86 Functional Changes ------------------ None Defects Corrected ----------------- Issue #6176 (normal): TEAC 52x32x52 CD-RW Drive CD-WE552G takes approximately 20 seconds to enumerate. Known Errata ------------ When booting the image with a MacPhyter card, KITL should be disabled. ----------------------------------------------------------------------------- VALIDATION ENVIRONMENT ----------------------------------------------------------------------------- Validated on: Norwich, version 3 rework E - Geode LX processor, silicon revision C1 @ 500 MHz - Geode CS5536 companion device, silicon revision B1 - 512 MB RAM DDR @ 400 MHz - PCI @ 33 MHz - Windows® CE 5.0 (1400) - GeodeROM v1.06.06 - Audio 1.01.00 - Graphics 2.03.02 - OAL 1.01.06 - AES 2.01.00 ----------------------------------------------------------------------------- INSTALLATION INSTRUCTIONS ----------------------------------------------------------------------------- Installation. ************* 1) Create $(_WINCEROOT)\Platform\GeodeLX dir 2) Copy all the files to $(_WINCEROOT)\PLATFORM\GeodeLX 3) Import the GeodeLX.cec file into the catalog. ----------------------------------------------------------------------------- CONFIGURATION INSTRUCTIONS ------------------------------------------------------------------------------ Set BSP_SUSPENDS3=1 to put the device to S3 state when the system is suspended. Set BSP_SUSPENDS1=1 to put the device to S1 state when the system is suspended. If both the flags are not defined or both are defined, then the device will go to S1 on a suspend. Set BSP_SKITL=1 to build a image with serial kitl support. Copy the image to the ce boot disk and boot locally. The image will block untill the Platform builder copnnects to it. Configure the connectivity options from Target-->Connectivity Options menu. Set the Download option to be none and Set the Transport Option as Serial. Set the buadrate=115220, 8, N, 1, no h/w flow control. Save the settings. Now select Target-->Attach Device from the menu. ----------------------------------------------------------------------------- BUILD INSTRUCTIONS ----------------------------------------------------------------------------- 1) Create a platform using this BSP 2) Add the neccessary drivers. 3) Build your platform in the normal way. ============================================================================= Copyright --------- © 2005 Advanced Micro Devices, Inc. All rights reserved. The contents of this document are provided in connection with Advanced Micro Devices, Inc. (“AMD”) products. AMD makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in AMD’s Standard Terms and Conditions of Sale, AMD assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. AMD’s products are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of AMD’s product could create a situation where personal injury, death, or severe property or environmental damage may occur. AMD reserves the right to discontinue or make changes to its products at any time without notice. Trademarks ---------- AMD, the AMD Arrow logo, and combinations thereof, and Geode are trademarks of Advanced Micro Devices, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other jurisdictions. Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies. =============================================================================