| Intel®
PRO/100+ Management Adapter |
||
| Intel PRO/100 VE Desktop
Adapters and Network Connections |
||
| Intel PRO/100+ Server
Adapter |
||
| Intel PRO/100+
Dual Port Server Adapter |
||
| Intel PRO/100 S
Server Adapter |
| Feature | Value | |
| Bus Compatibility | PCI 2.2 specification, 32-bit | |
| Media (cable) Connectors and Wiring | RJ45 Use Category 5 cabling at 100 Mbps Supports 100BASE TX Fast Ethernet |
|
| Data Rate Mode | 10 or 100 Mbps | |
| Interrupt Levels | PCI: INTA | |
| SRAM Transmit/Receive Buffer | 6 Kbytes | |
| Power Requirements | 0.67 Watts @ 5.0VDC | |
| Isolation Voltage | 200V RMS | |
| Operating Temperature | 0 - 55 degrees C | |
| Humidity | 10% - 90% non-condensing | |
| Diagnostic LEDs | Activity/Link, 100 Mbps | |
| Compliance & Certification | Safety -- UL FCC Class B CE & Immunity C-tick (Australian) BSMI (Taiwan) |
| Feature | Value | |
| Bus Compatibility | LAN on Motherboard: PCI 2.2
specification. LAN on Riser: CNR 1.0 specification. CNR Interfaces used: SMBus, LAN Connect Interface, LAN EEPROM. |
|
| Media (cable) Connectors and Wiring | RJ45 connector. Category 5 UTP cabling at 100 Mbps Supports 100BASE TX Fast Ethernet |
|
| Data Rate Mode | 10 or 100 Mbps | |
| Interrupt Levels | PCI: INTA | |
| SRAM Transmit/Receive Buffer | N/A (built-in to ICH2 chipset) | |
| Power Requirements | 0.3 Watts @ 3.3VDC | |
| Isolation Voltage | 200V RMS | |
| Operating Temperature | 0 - 55 degrees C | |
| Humidity | 10% - 90% non-condensing | |
| Diagnostic LEDs | Activity/Link, 100 Mbps | |
| Compliance & Certification | Safety -- UL FCC Class B CE & Immunity C-tick (Australian) |
| Feature | Value | |
| Bus Compatibility | PCI 2.2 specification, 32-bit | |
| Media (cable) Connectors and Wiring | RJ45 Use Category 5 cabling at 100 Mbps Supports 100BASE TX Fast Ethernet |
|
| Data Rate Mode | 10 or 100 Mbps | |
| Interrupt Levels | PCI: INTA | |
| SRAM Transmit/Receive Buffer | 6 Kbytes | |
| Power Requirements | 0.67 Watts @ 5.0VDC | |
| Isolation Voltage | 200V RMS | |
| Operating Temperature | 0 - 55 degrees C | |
| Humidity | 10% - 90% non-condensing | |
| Standards conformance |
IEEE 802.3 IEEE 802.3ac IEEE 802.3z IEEE 802.3x IEEE 802.1p IEEE 802.1Q PCI 2.2 specification |
|
| Diagnostic LEDs | Activity/Link, 100 Mbps | |
| Compliance & Certification | Safety -- UL FCC Class B CE & Immunity C-tick (Australian) BSMI (Taiwan) |
| Feature | Value | |
| Bus Compatibility | PCI 2.1 specification, 32-bit (adapters with part numbers 715191-00x and 751110-00x). | |
| Media (cable) Connectors and Wiring | RJ45 Use Category 5 cabling at 100 Mbps Supports 100BASE TX Fast Ethernet Standard |
|
| Data Rate Mode | 10 or 100 Mbps | |
| Interrupt Levels | PCI: INTA, INTB | |
| SRAM Transmit/Receive Buffer | 6 Kbytes per port | |
| Power Requirements | 6.5 Watts @ +5VDC (715191-00x and 751110-00x) | |
| Isolation Voltage | 200V RMS | |
| Operating Temperature | 0 - 55 degrees C | |
| Humidity | 10% - 90% non-condensing | |
| Diagnostic LEDs | Activity, Link, 100 Mbps | |
| Compliance & Certification | Safety -- UL FCC Class B CE & Immunity C-tick (Australian) BSMI (Taiwan) |
| Feature | Value | |
| Bus Compatibility | PCI 2.2 specification, 32-bit | |
| Media (cable) Connectors and Wiring | RJ45 Use Category 5 cabling at 100 Mbps Supports 100BASE TX Fast Ethernet |
|
| Data Rate Mode | 10 or 100 Mbps | |
| Interrupt Levels | PCI: INTA | |
| SRAM Transmit/Receive Buffer | 6 Kbytes | |
| Power Requirements | 1.73 Watts @ 5.0VDC | |
| Isolation Voltage | 200V RMS | |
| Operating Temperature | 0 - 55 degrees C | |
| Humidity | 10% - 90% non-condensing | |
| Diagnostic LEDs | Activity/Link, 100 Mbps | |
| Compliance & Certification | Safety -- UL FCC Class B CE & Immunity C-tick (Australian) BSMI (Taiwan) |