Symbios Logic SDMS 4.0 PCI UnixWare 2.0 C8XX-4.06.00 HBA Diskette Building
Instructions:


To create a C8XX HBA disk to use with UnixWare 2.1 and UnixWare 7, you must
copy the raw dd image file onto a 1.44 MB floppy. The process for doing this
will depend on what operating system you are using to create the disk.

------------------------------------------------
For UNIX System Users

1. Insert a 3.5" diskette into the floppy drive. 

2. At the UNIX prompt type: 

	dd if=/<path>/UW40600.DD of=/dev/rfd0

The <path> is where the dd image is located. On this CD, the dd image file 
is located here:

	{UNIX CDROM path}/DRIVERS/UNIX/SCOUWARE

This command will dd the image to the floppy to create a HBA diskette.

------------------------------------------------
For DOS System Users

Use a utility that will copy the raw .DD image onto a 1.44 MB floppy. 
This .DD image is located at:
	
	{DOS CDROM path}:\DRIVERS\UNIX\SCOUWARE\UW40600.DD 

"Rawrite", which is a public domain utility, is available on this CD. 
Instructions for using this utility are included in its accompanying 
"RAWRITE3.DOC" file. Rawrite is included on this CD-ROM at this location: 

	{DOS CDROM path}:\DRIVERS\UNIX 

After the image has been copied to a 3.5" diskette, use this HBA diskette 
for SCO UnixWare installations as instructed.