Chips and Technologies, Inc. Display Driver Package Release Notes for Windows NT 4.00 Revision: 1.1.7 Release Date: March 11, 1998 ================================ Enhancements: 1. 69000 chip support has been added with this release. This includes support for 69000 NTSC/PAL Vertical Reduction ( Underscan Scaling ) which has been added to Chips Control Panel Tab and display driver. The following problems have been fixed in the current release: 1. 1280x1024x256 Interlaced mode selection was not available. Revision: 1.1.5 Release Date: December 15, 1997 ================================ The following problems have been fixed in the current release: 1. When running DDTEST, and then opening and closing Active Movie sessions, an "OUTOFVIDEOMEMORY" error would be reported. This was due to the failure of ddraw to release offscreen video memory used for Overlay buffer when Active Movie session was closed. Revision: 1.1.4 Release Date: November 7, 1997 ================================ The following problems have been fixed in the current release: 1. WHQL direct draw Overfly test when run in Simultaneous mode would get garbage in right side of overlay rectangle when the screen is panned to the right. 2. FR346. Dual Processor systems would hang when moving large Windows around the desktop. Revision: 1.1.3 Release Date: September 19, 1997 ================================ The following problems have been fixed in the current release: 1. Various problems identified during WHQL Certification preparation. Enhancements: NTSC/PAL mode panning enable/disable has been added to Chips Control Panel Tab. Revision: 1.1.2 Release Date: September 12, 1997 ================================ The following problems have been fixed in the current release: 1. When playing an MPEG file and panning in mode 1280x1024 and 1024x768 colors, the color key seeps from the right. 2. The stretch mode does not stretch the direct draw window. 3. The TVOut modes do not align the video window properly. 4. The TVOut video playback is not being forced to an even start line. 5. All known video alignment problems. Revision: 1.1.1 Release Date: August 22, 1997 ================================ The following problems have been fixed in the current release: 1. Mode switch between NTSC Video and CRT/SIMUL/LCD modes causes corruption in Active Movie window. Revision: 1.1.0 Release Date: August 15, 1997 ================================ This driver release enables direct draw hardware overlay support. The following problems have been fixed in the current release: 1. FR499. Cursor disappears after return from video mode test. 2. FR508. Switching from NTSC mode to LCD mode using CHIPS TAB shifts image to upper part of screen, with lower portion filled with garbage. 3. Blue Screen when running EDIT in DOS Window and then switched to Full Screen. 4. NTSC/PAL Video Mode switch to DOS Full Screen has incorrect font. Revision: 1.0.9 Release Date: July 18, 1997 ================================ Installation of Chips Control Panel for NT (CNTNTDSP) has been added to oemsetup.inf. The following problems have been fixed in the current release: 1. 65550 -- Systems that are configured to support NTSC/PAL Video would get corrupted display when running 64K Color mode and switching from DOS Window to DOS Fullscreen session. 2. FR262. Invalid Video Modes presented for selection in Display Settings when system is switched to Simultaneous Display Mode. 3. Systems with 65535/65540 adapters hang during boot. Revision: 1.0.8 Release Date: May 22, 1997 ================================ The following problems have been fixed in the current release: 1. Pre-install of driver does not work. Defaults to VGA. 2. 65548 -- Cannot switch to Full Screen DOS session. 3. 65548 -- When in Display Settings, selecting Test to test new display setting causes system to hang. Failures 2,3 are due to a problem with BIOS Set Refresh function, which was introduced in later versions of 65548 Video BIOS. Fix has been temporarily made in miniport driver until BIOS fix is available. 4. 65545/548 VL/ISA -- The system will hang when doing a Restart after shutdown. 5. When switching to NTSC video, two cursor images appear on screen. 6. FR399. 64K and 16M color video modes fail n 65548. 7. FR329,FR330. 64300/64310 does not work with current NT4.0 driver. Revision: 1.0.7 Release Date: Apr 17, 1997 ================================ The following problems have been fixed in the current release: 1. Added support for Generic Modes 36,46,47,56,57. Custom panel information is no longer hard coded in driver. Panel information is obtained with BIOS. 2. Cursor movement and position is not correct when Graphics Mode stretching is enabled. Switch to software cursor is now done to allow proper cursor movement. 3. Added ExtEscape functions to support Chips VPM. Revision: 1.0.6 Release Date: Apr 02, 1997 ================================ The following problems have been fixed in the current release: 1. Added support for 1024x600 mode. Revision: 1.0.5 Release Date: Mar 31, 1997 ================================ The following problems have been fixed in the current release: 1. Added support for NTSC/PAL CRT Panning. 2. Added ExtEscape functions to support ChipsCPL. 3. Fixed NT 4.0 J problem switching to DOS Fullscreen session. Revision: 1.0.4 Release Date: Mar 10, 1997 ================================ 1. Added support for 65555 and 68554 chips. Revision: 1.0.3 Release Date: Mar 03, 1997 ================================ The following problems have been fixed in the current release: 1. Underline Text Cursor is missing after switching from Desktop to DOS Command Prompt full screen session. 2. Text Expansion gets reset during restore of DOS Command Prompt full screen session. 3. Invalid refresh selection ( 0 Hz ) listed in Display Settings. Revision: 1.0.2 Release Date: Jan 20, 1997 =========================== 1. Fixed problem with corruption in display window when using Media Player to play an MPEG (.MPG) file. 2. Fixed problem with AVI window freezing when playing and an overlapping DOS Command Prompt window was switched to full screen, then switched back to a window, and then minimized to tak bar. Media Player control would indicate that the video clip was playing, but nothing was being drawn in AVI window. 3. Fixed problem with 24bpp Transparent SRC/DST bitblt operations in Direct Draw. 4. Modified code to correctly output large font (glyphs) that reside in "packed" font files. Revision: 1.0.0 Release Date: Oct 4, 1996 ========================== 1. Added Direct Draw bitblt support for 6555x, 6554x. 2. Fixed the following problems: a. Full screen graphic VDMs are stretched vertically and horizontally. b. Mouse cursor disappears when you go to the right edge or bottom edge in 800x600 or 1024x768 modes. c. Start WinNT 4.0 with true color mode(mode 50 or 52). Select any background pattern from the Display Properties Background sheet. Click OK. You will see that the background palette is corrupt. d. Memory size detection and mode missing problem on 65554.