SBC-670S/670
Pentium Pro Full-size CPU Card with SCSI

Features
¥ Supports Intel Pentium Pro CPU 150~200MHz, ZIF socket 8
¥ Onboard Ultra-wide SCSI interface
¥ Supports two USB ports
¥ Supports 9-bit GPIO
¥ Plug and Play I/O address IRQ selection

Specifications
CPU                                    Intel Pentium Pro CPU 150~200MHz.
BIOS                                   AMI Flash BIOS supports DMI, Pnp, 
Green features and Adaptec 7880 Ultra-wide SCSI RAID BIOS.
Chipset                              Intel 440FX chipset
Bus interface                    PCI/ISA bus, PICMG 2.0 standard .
System memory               8MB to 128MB. Four 72-pin SIMM 
sockets on board. Supports BEDO, EDO, and Fast Page DRAM.
Shadow RAM memory     Supports system and video BIOS shadow 
 memory.
DMA channels	        7
Interrupt levels	        15
Enhanced IDE                    Supports up to four IDE devices including
 hard disk drives with PIO mode 3, 4.    
FDD interface                    Supports up to two floppy disk drives.


Parallel port                          One bi-directional parallel port. Supports 			           SPP, ECP, and EPP.
Serial ports                           Two RS-232 ports (IrDA Tx/Rx header 
as an option). Both use 16C550 UARTs with 16-byte FIFO.
Keyboard/mouse                  6-pin mini-DIN connector supports standard 
connector                              PC/AT keyboard and PS/2 mouse.
USB connectors                  Two USB connectors onboard.
Watchdog timer                   The timeout interval is software selectable 			          (2 sec~128 min, 1 sec/step).
Power management	          I/O peripheral devices supports power 				          saving and doze/standby/suspend modes. 			          APM1.2 compliant.
SCSI controller	          Adaptec 7880
SCSI-II interface                   8-bit SCSI-II interface
Ultra-wide SCSI                   16-bit Ultra-wide SCSI interface 
interface                               (40MB/sec)
GPIO port                              9-bit GPIO port supported.
Power supply                        +5V (4.75V to 5.25V)      
voltage                                   +12V (11.4V to 12.6V)
Max. power                            +5V @ 12A
requirement                  
Operating temperature         320 to 1400F (00 to 600C)
Board size                             13.3Ó (L) x 4.8Ó (W) (338 mm x 122 mm)
Weight                                    0.4 kg


SBC-598
Pentium MMX, K6 Full-size CPU 
Card with SSD & SVGA

High Drive

Features
¥ Supports Pentium P54C/P55C (MMX), AMD K5/K6 and Cyrix  
  M1/M2 CPUs
¥ Full-size PCI and ISA bus CPU card
¥ High drive supports more peripheral cards
¥ SiS 5598 Chipset: XGA controller integrated
¥ DiskOnChip: Supports M-Systems DiskOnChip 2000 series.


Specifications 
CPU 


CPU socket
BIOS
Chipset


Bus interface
Level 2 cache
System memory

DMA channels
Interrupt levels
Enhanced IDE 


FDD interface


Intel Pentium P54C, P55C (MMX) 166~233MHz, Cyrix 6x86 PR100+~166+, M2, AMD K5 R75~166, K6 PR2 166~233
socket 7
Award FLASH BIOS
SiS5598 meets PC97 requirements. Video/graphics accelerator and PMU controller integrated.
PCI/ISA bus, PICMG 2.0 standard.
Onboard 512KB pipeline burst L2 cache.
2MB up to 256MB. Four 72-pin SIMM and one 168-pin DIMM sockets onboard.
7
15
Supports up to four IDE devices. Supports PIO mode 1~4, PCI Bus Mastering, Multi-word DMA, and Ultra DMA/33.
Supports up to two floppy disk drives, 5.25Ó (360KB and 1.2MB) and/or 3.5Ó (720KB, 1.44MB and 2.88MB).


Parallel ports

Serial ports


Keyboard/mouse
connector
USB connectors
Watchdog Timer


Power Management


VGA controller
Display memory
Display type
Resolution
SSD interface


Smart temp control
Power supply voltage

Power requirement


Operating temperature
Board size
Weight



Configured to LPT1, LPT2, LPT3 or disabled.
Supports SPP, ECP, and EPP.
2 RS-232 serial ports. Ports can be individually configured as COM1, COM2, COM3, COM4 or disabled individually.
6-pin mini-DIN connector supports standard
PC/AT keyboard and PS/2 mouse.
Two USB connectors onboard.
Can generate a system reset, IRQ15 or NMI, and supports selectable timeout interval
(2 sec~128 min, 1 sec/step).
I/O peripheral devices support power saving and doze/standby/suspend modes.  APM1.2 compliant.
SiS 5598.
Supports shared system memory up to 4MB.
Supports CRT displays
Supports up tp 1024 x 768 @ 16.7M colors
One 32-pin DIP socket supports M-Systems
DiskOnChip 2000 series, memory capacity from 
2MB to 72MB.
LM75 supports CPU temperature monitoring.
+5V (4.75V to 5.25V)
+12V (11.4V to 12.6V)
Bare Board: 	+5V @ 2A
Pentium MMX-200: 	+5V @ 6A
AMD K6-233: 	+5V @ 10A
32¡ to 140¡F (0¡ to 60¡C)

13.3" (L) x 4.8" (W) (338 mm x 122 mm)
0.4 kg


SBC-670S/670
Pentium Pro Full-size CPU Card with SCSI

Features
¥ Supports Intel Pentium Pro CPU 150~200MHz, ZIF socket 8
¥ Onboard Ultra-wide SCSI interface
¥ Supports two USB ports
¥ Supports 9-bit GPIO
¥ Plug and Play I/O address IRQ selection

Specifications
CPU                                    Intel Pentium Pro CPU 150~200MHz.
BIOS                                   AMI Flash BIOS supports DMI, Pnp, 
Green features and Adaptec 7880 Ultra-wide SCSI RAID BIOS.
Chipset                              Intel 440FX chipset
Bus interface                    PCI/ISA bus, PICMG 2.0 standard .
System memory               8MB to 128MB. Four 72-pin SIMM 
sockets on board. Supports BEDO, EDO, and Fast Page DRAM.
Shadow RAM memory     Supports system and video BIOS shadow 
 memory.
DMA channels	        7
Interrupt levels	        15
Enhanced IDE                    Supports up to four IDE devices including
 hard disk drives with PIO mode 3, 4.    
FDD interface                    Supports up to two floppy disk drives.


Parallel port                          One bi-directional parallel port. Supports 			           SPP, ECP, and EPP.
Serial ports                           Two RS-232 ports (IrDA Tx/Rx header 
as an option). Both use 16C550 UARTs with 16-byte FIFO.
Keyboard/mouse                  6-pin mini-DIN connector supports standard 
connector                              PC/AT keyboard and PS/2 mouse.
USB connectors                  Two USB connectors onboard.
Watchdog timer                   The timeout interval is software selectable 			          (2 sec~128 min, 1 sec/step).
Power management	          I/O peripheral devices supports power 				          saving and doze/standby/suspend modes. 			          APM1.2 compliant.
SCSI controller	          Adaptec 7880
SCSI-II interface                   8-bit SCSI-II interface
Ultra-wide SCSI                   16-bit Ultra-wide SCSI interface 
interface                               (40MB/sec)
GPIO port                              9-bit GPIO port supported.
Power supply                        +5V (4.75V to 5.25V)      
voltage                                   +12V (11.4V to 12.6V)
Max. power                            +5V @ 12A
requirement                  
Operating temperature         320 to 1400F (00 to 600C)
Board size                             13.3Ó (L) x 4.8Ó (W) (338 mm x 122 mm)
Weight                                    0.4 kg


SBC-598
Pentium MMX, K6 Full-size CPU 
Card with SSD & SVGA

High Drive

Features
¥ Supports Pentium P54C/P55C (MMX), AMD K5/K6 and Cyrix  
  M1/M2 CPUs
¥ Full-size PCI and ISA bus CPU card
¥ High drive supports more peripheral cards
¥ SiS 5598 Chipset: XGA controller integrated
¥ DiskOnChip: Supports M-Systems DiskOnChip 2000 series.


Specifications 
CPU 


CPU socket
BIOS
Chipset


Bus interface
Level 2 cache
System memory

DMA channels
Interrupt levels
Enhanced IDE 


FDD interface


Intel Pentium P54C, P55C (MMX) 166~233MHz, Cyrix 6x86 PR100+~166+, M2, AMD K5 R75~166, K6 PR2 166~233
socket 7
Award FLASH BIOS
SiS5598 meets PC97 requirements. Video/graphics accelerator and PMU controller integrated.
PCI/ISA bus, PICMG 2.0 standard.
Onboard 512KB pipeline burst L2 cache.
2MB up to 256MB. Four 72-pin SIMM and one 168-pin DIMM sockets onboard.
7
15
Supports up to four IDE devices. Supports PIO mode 1~4, PCI Bus Mastering, Multi-word DMA, and Ultra DMA/33.
Supports up to two floppy disk drives, 5.25Ó (360KB and 1.2MB) and/or 3.5Ó (720KB, 1.44MB and 2.88MB).

Parallel ports

Serial ports


Keyboard/mouse
connector
USB connectors
Watchdog Timer


Power Management


VGA controller
Display memory
Display type
Resolution
SSD interface


Smart temp control
Power supply voltage

Power requirement


Operating temperature
Board size
Weight

Configured to LPT1, LPT2, LPT3 or disabled.
Supports SPP, ECP, and EPP.
2 RS-232 serial ports. Ports can be individually configured as COM1, COM2, COM3, COM4 or disabled individually.
6-pin mini-DIN connector supports standard
PC/AT keyboard and PS/2 mouse.
Two USB connectors onboard.
Can generate a system reset, IRQ15 or NMI, and supports selectable timeout interval
(2 sec~128 min, 1 sec/step).
I/O peripheral devices support power saving and doze/standby/suspend modes.  APM1.2 compliant.
SiS 5598.
Supports shared system memory up to 4MB.
Supports CRT displays
Supports up tp 1024 x 768 @ 16.7M colors
One 32-pin DIP socket supports M-Systems
DiskOnChip 2000 series, memory capacity from 
2MB to 72MB.
LM75 supports CPU temperature monitoring.
+5V (4.75V to 5.25V)
+12V (11.4V to 12.6V)
Bare Board: 	+5V @ 2A
Pentium MMX-200: 	+5V @ 6A
AMD K6-233: 	+5V @ 10A
32¡ to 140¡F (0¡ to 60¡C)

13.3" (L) x 4.8" (W) (338 mm x 122 mm)
0.4 kg


SBC-597
Pentium MMX, K6 Full-size CPU Card with LCD & SSD

High Drive

Features
¥ Supports Pentium compatible CPUs with system bus frequencies 
  of 100/66 MHz.
¥ Chipset: VIA MVP3
¥ Hardware state monitoring system for temperature, power 
  voltage, and fan speeds.
¥ ECC memory support
¥ High Drive supports more peripheral cards
¥ LCD Controller: C&T 69000, supports up to 36-bit TFT panels
¥ DiskOnChip up to 72MB

Specifications 

CPU 


CPU socket
BIOS
Chipset
Bus interface
Level 2 cache
System memory


DMA channels
Interrupt levels
Enhanced IDE 


FDD interface


Parallel port


Intel Pentium P54C, P55C (MMX) 166~233MHz, Cyrix/IBM/SGS 6X86 PR100+~166+, M2, AMD K5 PR75~166, K6 PR2 166~300
socket 7
Award Flash BIOS
VIA MVP3
PCI/ISA bus, PICMG 2.0 standard.
Onboard 512KB pipeline burst L2 cache.
Two 72-pin SIMM and two 168-pin DIMM sockets. Support 4MB to 128MB DRAM or SDRAM with 100/66 MHz memory interface and ECC function.
7
15
Supports up to four IDE devices. Supports PIO mode 1~4, PCI Bus Mastering, Multi-word  DMA, and Ultra DMA/33.
Supports up to two floppy disk drives, 5.25Ó
(360KB and 1.2MB) and/or 3.5Ó (720KB, 1.44MB and 2.88MB).
Configured to LPT1, LPT2, LPT3 or disabled.
Supports SPP, ECP, and EPP.

serial ports


Keyboard/mouse
connector
USB connectors
Watchdog timer


PC/104
Power management

LCD controller
Display memory
Display type

Resolution
Invertor connector


SSD interface


Hardware state monitoring system

Power supply voltage
Power requiement


Operating temperature
Board size
Weight

One RS232 and one RS232/422/485 serial port. Ports can be individually configured as COM1, COM2, COM3, COM4, or disabled individually.
6-pin mini-DIN connector supports standard
PC/AT keyboard and PS/2 mouse.
Two USB connectors onboard.
Can generate a system reset, IRQ15 or NMI. Supports selectable timeout interval (2 sec~128 min, 1 sec/step).
104-pin connector for 16-bit bus.
I/O peripheral devices support power saving and doze/standby/suspend modes. APM1.2 compliant.
C&T 69000
2MB integrated SDRAM memory.
Supports CRT displays and flat panels (TFT, DSTN, and Mono) simultaneously.
Supports up to 1280 x 1024 @ 256 colors.
5-pin invertor connector provides the power for LCD backlight, and allows power management functions to be setup in CMOS SETUP menu.
One 32-pin DIP socket supports M-Systems
DiskOnChip 2000 series, memory capacity from 
2MB to 72MB.
Provides the utilities to monitor harware parameters including temperature, power supply voltage, and fan speeds.
+5V (4.75V to 5.25V)
+12V (11.4V to 12.6V)
Bare Board: 	+5V @ 2A
Pentium MMX-200: 	+5V @6A
AMD K6-233: 	+5V @10A
32¡ to 140¡F (0¡ to 60¡C)

13.3" (L) x 4.8" (W) (338 mm x 122 mm)
0.4 kg



SBC-590
Pentium Full-size CPU Card 
with SVGA

Features
¥ Accepts Intel Pentium 75-200 MHz CPUs and other compatible   
  CPUs like Cyrix 6x86 and AMD 5k86 CPUs at 66/60/50/40 MHz   
  (external clock speed)
¥ On-board 32-bit PCI-bus SVGA controller
¥ Built-in, fast PCI enhanced IDE controller supports four IDE 
  devices (large HDDs, CD-ROM, tape backup, etc.)
¥ Supports a Feature Connector

Specifications 

CPU 


CPU socket
BIOS
Chipset
Bus interface
Level 2 cache

System memory

Shadow RAM memory
DMA Channels
Interrupt levels
Enhanced IDE



FDD Interface


Intel Pentium 75-200 MHz CPUs and other compatible CPUs at 66/60/50/40 MHz (external clock speed)
socket 7
Award Flash BIOS
VIA VT82C575M/576M
PCI/ISA bus, PICMG 2.0 standard
256KB/512KB L2 cache memory (Supports pipline burst RAM module).
1MB to 128MB. Four 72-pin SIMM sockets on board. Supports EDO and FP DRAM.
Supports system and video BIOS shadow memory.
7
15
Supports up to four enhanced IDE (ATA-2) large hard disk drives or other enhanced IDE devices. Supports mode 3 and mode 4 hard disks (11.1 MB/sec minimum data transfer rate).
Supports up to two floppy disk drives, 5.25ÕÕ (360 KB and 1.2 MB) and/or 3.5ÕÕ (720 KB, 1.44 and 2.88 MB)


Parallel port

Serial ports



Keyboard/ PS/2 mouse connector

Watchdog timer

Power management
VGA controller
Display memory
Display type
Resolution
Feature connector
PC/104 connector
Power supply voltage
Max. power requirement
Operating temperature
Board size
Weight

Configurable to LPT1, LPT2, LPT3 or disabled. Supports SPP/EPP/ECP standards.
Two RS-232 serial ports, using 16C550 UARTs with 16-byte FIFO buffer. Supports speeds up to 115 Kbps. Ports can be individually configured from COM1 to COM4 or disabled.
A 6-pin mini DIN keyboard connector is located on the mounting bracket for easy access to a keyboard and a PS/2 mouse.
Can generate a system reset or IRQ15. The time interval is software selectable from 1 to 64 seconds.
I/O peripheral devices support power saving and doze/standby/suspend modes.  APM1.1 compliant.
ALG 2032
1MB onboard. 
Supports CRT displays
Supports up to 1024 x 768 @ 256 colors.
26-pin header
104-pin connector for a 16-bit bus.
+5V (4.75V to 5.25V), a cooling fan is necessary for all CPUs.
+5V @ 5A

320 to 1400F (00 to 600C)

13.3Ó (L) x 4.8Ó (W) (338 mm x 122 mm)
0.4 kg



SBC-570S/570
Pentium MMX, K6 Full-size CPU Card with Ultra-wide SCSI

Features
¥ Intel Pentium P54C/P55C (MMX), AMD K5/K6, Cyrix M1/M2 CPUs
¥ Onboard Ultra-wide SCSI interface
¥ Supports two USB ports
¥ Supports Intel COAST cache module up to 512KB to provide a 
  high-performance L2 cache subsystem
¥ Plug and Play I/O address and IRQ selection

Specifications 

CPU 


CPU socket
BIOS


Chipset
Bus Interface
System memory


DMA channels
Interrupt levels
Enhanced IDE 

FDD interface


Intel Pentium P54C, P55C (MMX) 166~233MHz, Cyrix 6x86 PR100+~166+, M2, AMD K5 R75~166, K6 PR2 166~233
Socket 7
AMI Flash BIOS supports DMI, PnP, Green Features and Adaptec 7880 Ultra-wide SCSI RAID BIOS
Intel Triton 430 VX chipset
PCI/ISA bus, PICMG 2.0 standard
8MB to 128MB. Four 72-pin SIMM sockets onboard.  Supports BEDO and Fast Page DRAM.
7
15
Supports up to four IDE devices including hard disk drives with PIO mode 3, 4.
Supports up to two floppy disk drives. 

Parallel port

serial ports

Keyboard/mouse
connector
USB connector
Watchdog timer

Power management


SCSI controller
SCSI-ll interface
Ultra-wide SCSI
interface
PC/104 connector
Power supply 
voltage
Max. power
requirement

Operating temperature
Board size
Weight

One bi-directional parallel port. Supports SPP, ECP, and EPP.
Two RS-232 ports. Both use 16C550 UARTs with 16-byte FIFO.
6-pin mini-DIN connector supports standard
PC/AT keyboard and PS/2 mouse.
Two USB connectors onboard.
The timeout interval is software selectable (1 sec ~128 min, 1 sec/step).
I/O peripheral devices support power saving and doze/standby/suspend modes. APM1.2 compliant.
Adaptec 7880
8-bit SCSI-ll interface
16-bit Ultra-wide SCSI interface (40MB/sec)

104-pin connector for a 16-bit bus.
+5V (4.75V to 5.25V)
+12V (11.4V to 12.6V)
Bare Board: 	+5V @ 1.5A
Pentium MMX-200: 	+5V @ 6A
AMD K6-200: 	+5V @ 8A
32¡ to 140¡F (0¡ to 60¡C)

13.3Ó (L) x 4.8Ó (W) (338 mm x 122 mm )
0.4 kg


SBC-490
486 Full-size CPU Card 
with SVGA

Features
¥ Supports Intel, AMD, Cyrix and other compatible 486 CPUs
¥ Onboard 32-bit PCI bus SVGA controller (can be disabled)
¥ Supports feature connector
¥ Connector for PC/104 module expansion
¥ Onboard two high-speed RS-232 serial ports

Specifications 

CPU
CPU Socket
BIOS
Chipset
Bus Interface
Level 2 cache
System memory

Shadow RAM memory
DMA channels
Interrupt levels
Enhanced IDE

FDD interface
Parallel port

80486DX2/DX4/DX5, 5x86-133 MHz
Socket 3
AMI Flash BIOS
ALi M1487/M1489
PCI/ISA bus, PICMG 2.0 standard
128/256/512KB L2 cache memory.
1MB to 128MB. Four 72-pin SIMM sockets 
onboard.  Supports EDO and FP DRAM.
Supports system and video BIOS shadow memory .
7
15
Fast PCI bus. Supports up to four enhanced IDE devices (ATA-2).
Supports up to two floppy disk drives.
One bi-directional parallel port. Supports SPP, ECP, and EPP.


Serial Ports



Keyboard/mouse
connector

Watchdog timer


Power management


VGA Controller
Display memory
Display type
Resolution
Feature connector
PC/104 connector
power supply
voltage
Max. power
requirement
Operating
temperature
Board size
Weight

Two RS-232 ports, using 16C550 UARTs with 16-byte FIFO buffer. Supports speeds up to 115KB/sec. Ports can be individually configured from COM1 to COM4 or disabled.
One 6-pin mini-DIN connector is located on the mounting bracket for easy access. An onboard keyboard 5-pin header connector is also available.
Can generate a system reset, IRQ 15 or NMI.
Selectable timeout interval. (2sec~32sec, 2sec/step).
I/O peripheral devices support power saving and doze/standby/suspend modes.  APM1.1 compliant.
Trident TGUI9440
1MB on board, upgradable to 2MB. 
Supports CRT displays.
Supports up to 1024 x 768 @ 64K colors.
26-pin header
104-pin connector for a 16-bit bus.
 +5V (4.75V to 5.25V)

+5V @ 5A

32¡ to 140¡F (0¡ to 60¡C)

13.3Ó (L) x 4.8Ó (W) (338 mm x 122 mm)
0.4 kg



SBC-555
Pentium MMX, K6 Half-size CPU Card with SSD & LCD

Features
¥ Supports Pentium P54C/P55C (MMX), AMD K5/K6 and Cyrix 
  M1/M2 CPUs
¥ Half-size ISA bus CPU card
¥ Equipped with a switching power module supporting up to 10 
  Ampere CPU power consumption
¥ DiskOnChip (SSD) up to 72MB
¥ C&T 65554 LCD controller supports 36-bit TFT panels
¥ Bus Master IDE and Ultra DMA/33 supported

Specifications 

CPU 


BIOS
Chipset
Bus Interface
Level 2 cache
System memory
DMA channels
Interrupt levels
Enhanced IDE


FDD interface
Parallel port

Serial ports

Intel Pentium P54C, P55C (MMX) 166~233MHz,
Cyrix/IBM/SGS 6X86 PR100+~166+, M2, AMD K5 PR75~166, K6 PR2 166~233
Award Flash BIOS
SiS 5582
ISA Bus
Onboard 512KB pipeline burst L2 cache
Two 72-pin SIMM sockets, supports up to 128MB DRAM
7
15
Supports up to two IDE devices. BIOS auto-detect, supports PIO mode 4 and Bus Master. Also supports Multi-word DMA and Ultra DMA/33.
Supports up to two floppy disk drives.
Configured to LPT1, LPT2, LPT3 or disabled. Supports SPP, ECP, and EPP.
One RS-232 and one RS-232/422/485 serial ports. Ports can be configured as COM1, COM2, COM3, COM4 or disabled individually. Two 16C550 serial UARTs.

IrDA interface
Keyboard/mouse
connector
USB connectors 
Watchdog timer


Power management


VGA controller
Display memory
Display type

Resolution
Invertor connector


SSD interface


Power supply 
voltage
Max. power
requirement

Operating temperature
Board size
Weight

One IrDA connector reserved for future use.
6-pin mini-DIN connector supports standard PC/AT keyboard and PS/2 mouse.
Two USB connectors onboard.
Can generate a system reset, IRQ15 or NMI. software selectable time out interval (2 sec~128 min, 1 sec/step).
I/O peripheral devices support power saving and doze/standby/suspend modes.  APM1.2 compliant.
C&T 65554
2MB onboard
Supports CRT and LCD (TFT, STN, and Mono) displays, up to 36-bit TFT panels.
Supports up tp 1024 x 768 @ 64K colors.
5-pin invertor connector provides the power for LCD backlight, and allows power management functions to be setup in CMOS SETUP menu.
One 32-pin DIP socket supports M-Systems 
DiskOnChip 2000 series, memory capacity from 2MB to 72MB.
+5V (4.75V to 5.25V)
+12V (11.4V to 12.6V)
Bare Board: +5V @ 1.5A, +12V @ 20mA
Pentium MMX-200: +5V @ 6A
AMD K6-233: +5V @ 10A
32¡ to 140¡F (0¡ to 60¡C)

7.3Ó (L) x 4.8Ó (W) (185 mm x 122 mm )
0.23 kg



SBC-554V
Pentium MMX, K6 Half-size PISA CPU Card with SSD & LCD

PISA BUS

Features
¥ Supports Pentium P54C/P55C (MMX), AMD K5/K6 and Cyrix 
  M1/M2 CPUs
¥ Half-size PISA (PCI+ISA) bus CPU card
¥ Equipped with a switching power module supporting up to 10 
  Ampere CPU power consumption
¥ DiskOnChip (SSD) up to 72MB
¥ C&T 65554 LCD controller supports 36-bit TFT panel
¥ Bus Master IDE and Ultra DMA/33 supported

Specifications 

CPU 


BIOS
Chipset
Bus interface
Level 2 cache
System memory

DMA channels
Interrupt levels
Enhanced IDE


FDD interface
Parallel port

Serial ports

Intel Pentium P54C, P55C (MMX) 166~233MHz,
Cyrix/IBM/SGS 6X86 PR100+~166+, M2, AMD
K5 PR75~166, K6 PR2 166~233
Award Flash BIOS
SiS 5582
PISA (PCI+ISA) Bus
Onboard 512KB pipeline burst L2 cache.
Two 72-pin SIMM sockets.  Support up to 128MB DRAM.
7
15
Supports up to two IDE devices. BIOS auto-detect, supports PIO mode 4 and Bus master. Also supports mullti-word DMA and Ultra DMA/33.
Supports up to two floppy disk drives.
Configured to LPT1, LPT2, LPT3 or disabled. 
Supports SPP, ECP, and EPP.
One RS-232 and one RS-232/422/485 serial ports. Ports can be confugured as COM1, COM2, COM3, COM4 or disabled individually. Two 16C550 serial UARTs.

IrDA interface
Keyboard/mouse
connector
USB connectors
Watchdog timer


Power management


VGA controller 
Display memory
Display type

Resolution
Invertor connector


SSD interface


Power supply
voltage
Max. power
requirement

Operating temperature
Board size
Weight


One IrDA connector reserved for future use.
6-pin mini-DIN connector supports standard PC/AT keyboard and PS/2 mouse.
Two USB connectors onboard.
Can generate a system reset, IRQ15 or NMI. software selectable time out interval (2 sec~128 min, 1 sec/step).
I/O peripheral devices support power saving and doze/standby/suspend modes. APM1.2 compliant.
C&T 65554
2MB onboard
Supports CRT and LCD (TFT, STN, and Mono) displays, up to 36-bit TFT panels.
Supports up to 1024 x 768 @ 64K colors. 
5-pin invertor connector provides the power for LCD backlight, and allows power management functions to be setup in CMOS SETUP menu.
One 32-pin DIP socket supports M-Systems
DiskOnChip 2000 series, memory capacity from 2MB to 72MB.
+5V (4.75V to 5.25V)
+12V (11.4V to 12.6V)
Bare Board: 	+5V @1.5A, +12V @ 20mA
Pentium MMX-200: 	+5V @ 6A
AMD K6-233: 	+5V @ 10A
32¡ to 140¡F (0¡ to 60¡C)

7.3" (L) x 4.8" (W) (185 mm x 122 mm)
0.23 kg



SBC-551/552
Pentium MMX, K6 Half-size CPU Card with SSD & CRT

Features
¥ Supports Pentium P54C/P55C (MMX), AMD K5/K6 and 
  Cyrix M1/M2 CPUs
¥ Half-size PISA bus CPU card for SBC 551, and half-size ISA bus 
  CPU card for SBC-552
¥ Equipped with a switching power module supporting up to 10 
  Ampere CPU power consumption
¥ DiskOnChip (SSD) up to 72MB
¥ SiS 5598 chipset: XGA controller integrated
¥ Bus Master IDE and Ultra DMA/33 supported

Specifications 

CPU 


BIOS
Chipset
Bus interface
Level 2 cache
System memory
DMA channel
Interrupt levels
Battery
Enhanced IDE


FDD interface
Parallel port


Intel Pentium P54C, P55C (MMX) 166~233MHz,
Cyrix/IBM/SGS 6x86 PR100+~166+, M2, AMD
K5 PR75~166, K6 PR2 166~233
Award Flash BIOS
SiS 5598
PISA Bus for SBC-551, ISA Bus for SBC-552
Onboard 512KB pipeline burst L2 cache
Two 72-pin SIMM sockets.  Supports up to 128MB DRAM
7
15
Lithium battery for data retention of up to 10 years.
Supports up to two IDE devices. BIOS auto-detect, supports PIO mode 4 and Bus Master. Also supports multi-word DMA and Ultra DMA/33.
Supports up to two floppy disk drives.
Configured to LPT1, LPT2, LPT3 or disabled. Supports SPP, ECP, and EPP.

Serial ports



IrDA interface
Keyboard/mouse
connector
USB connectors
Watchdog timer


Power management
VGA controller
Display memory 
Display type
Resolution
SSD interface


CPU thermal detector
Power supply
voltage
Max. power
requirement

Operating 
temperature
Board size
Weight

One RS-232 and one RS-232/422/485 serial ports. Ports can be configured as COM1, COM2, COM3, COM4 or disabled individually. Two 16C550 serial UARTs.
One IrDA connector reserved for future use.
6-pin mini-DIN connector supports standard PC/AT
Keyboard and PS/2 mouse.
Two USB connectors onboard.
Can generate a system reset, IRQ15 or NMI. Software selectable time out interval (2 sec~128 min, 1 sec/step).
I/O peripheral devices support power saving and doze/standby/suspend modes. APM1.2 compliant.
SiS 5598
Supports shared system memory up to 4MB. 
Supports CRT displays
Supports up tp 1024 x 768 @ 16.7M colors
One 32-pin DIP socket supports M-Systems DiskOnChip 2000 series, memory capacity from 2MB to 72MB.
LM75 supports CPU temperature, & fan monitoring.

+5V (4.75V to 5.25V)
+12V (11.4V to 12.6V)
Bare Board: 	+5V @ 1.5A
Pentium MMX-200: 	+5V @ 6A
AMD K6-233: 	+5V @ 10A
32¡ to 140¡F (0¡ to 60¡C)

7.3" (L) x 4.8" (W) (185 mm x 122 mm)
0.23 kg



SBC-456E/456
486 Half-size CPU Card with LCD, SSD & Ethernet

CPU Onboard

Features
¥ CPU: AMD DX5-133 CPU (SQFP Type)
¥ Level 2 cache: Onboard 128KB L2 cache
¥ VGA controller : C&T 65550 with display memory 1MB onboard, 
  2MB optional
¥ DiskOnChip (SSD) up to 72MB
¥ Ethernet interface (SBC-456E model): Supports 10Base-T, remote   
  boot ROM function, compatible with Novell NE 2000

Specifications 

CPU 
BIOS
Chipset
Bus interface
Level 2 cache
System memory
DMA channel
Interrupt levels
Enhanced IDE

FDD interface


Parallel port

Serial ports

AMD DX4-100/DX5-133 (SQFP Type)
AMI Flash BIOS
ALi M1487/M1489
ISA bus
Onboard 128KB L2 cache
1MB to 64MB. Two 72-pin SIMM sockets.
7
15
Supports up to two IDE devices, supports PIO mode 3/4 and Bus Master.
Supports up to two floppy disk drives, 5.25Ó (360KB and 1.2MB) and/or 3.5Ó (720KB, 1.44MB and 2.88MB).
Configured to LPT1, LPT2, LPT3 or disabled.
Supports SPP, ECP, and EPP.
One RS-232 and one RS-232/422/485 serial port. Two 16C550 serial UARTs.

IrDA interface
Keyboard/mouse
connector
Watchdog timer


Power management

VGA controller
Display memory
Display type

Resolution
Ethernet controller
(for 456E)
Ethernet interface

SSD interface


PC/104
Power supply 
voltage
Max. power
Requirement
Operating 
temperature
Board size
Weight

One IrDA connector reserved for future use.
6-pin mini-DIN connector supports standard PC/AT keyboard and PS/2 mouse.
Can generate a system reset, IRQ15 or NMI. Software selectable timeout interval (2 sec~128 min, 1 sec/step).
I/O peripheral devices support power saving and doze/standby/suspend modes. APM1.1 compliant.
C&T 65550
1MB onboard, 2MB optional.
Supports CRT and LCD (TFT, STN, EL, and Mono) displays simultaneously.
Supports up to 1024 x 768 @ 64K colors.
Realtek RTL8029AS 10Base-T PCI-Bus Ethernet controller.
Novell NE 2000 compatible, software drivers available. Supports remote boot ROM function.
One 32-pin DIP socket supports M-Systems DiskOnChip 2000 series, memory capacity from 2MB to 72MB.
104-pin connector for a 16-bit bus.
+5V (4.75V to 5.25V)
+12V (11.4V to 12.6V)
+5V @ 3A

32¡ to 140¡F (0¡ to 60¡C)

7.3" (L) x 4.8" (W) (185 mm x 122 mm)
0.23 kg



SBC-455
486 Half-size CPU Card with Flat Panel/CRT SVGA

Features
¥ Supports Intel, AMD, Cyrix and other compatible 486 CPUs
¥ Onboard 32-bit PCI-bus LCD/CRT SVGA controller
¥ Onboard up to 512KB L2 cache memory
¥ Connector for PC/104 module expansion

Specifications 

CPU 
BIOS
Chipset
Bus interface
Level 2 cache
System memory

Shadow RAM memory
DMA channels
Interrupt levels
Enhanced IDE




FDD interface
Parallel port


80486DX2/DX4/DX5, 5x86-133 MHz
AMI Flash BIOS
ALi M1487/M1489
ISA Bus
128/256/512KB L2 cache memory
1MB to 64MB. Two 72-pin SIMM sockets onboard.
Supports system and video BIOS shadow memory. 
7
15
Fast PCI bus. Supports up to four enhanced IDE (ATA-2) large hard disk drives or other enhanced IDE devices. Supports mode 3 and mode 4 hard disks (data transfer rate 11.1MB/sec minimum).
Supports up to two floppy disk drives.
One bi-directional parallel port. Supports SPP, ECP, and EPP.

Serial ports



Keyboard/mouse
connector

Watchdog timer


Power management
VGA controller
Display memory
Display type

Resolution
PC/104 connector
Power supply
voltage

Max. power
requirement
Operating 
temperature
Board size
Weight

Two RS-232 ports, using 16C550 UARTs with 16-byte FIFO buffer. Supports speed up to 115 KB/sec. Ports can be individually configured from COM1 to COM4 or disabled.
One 6-pin mini-DIN connector is located on the mounting bracket for easy access. An onboard keyboard 5-pin header connector is also available. 
Can generate a system reset or IRQ15. The time interval is software selectable from 2 to 32 seconds (15 steps, 2 sec/step).
I/O peripheral devices support power saving and doze/standby/suspend modes. APM1.1 compliant.
C&T 65548 
512KB onboard, upgradable to 1MB.
Supports TFT, STN, EL and Mono flat panel displays as well as standard CRT displays. 
Supports up to 1024 x 768 @ 256 colors. 
104-pin connector for a 16-bit bus. 
+5V (4.75V to 5.25V)
+12V, -12V; cooling fan is necessary for 
all CPUs.
+5V @ 2.5A

32¡ to 140¡F (0¡ to 60¡C)

7.3Ó (L) x 4.8Ó (W) (185 mm x 122 mm)
0.23 kg



SBC-411E/411
486 Half-size CPU Card with Ethernet & SSD

CPU Onboard

Features
¥ CPU: AMD DX5-133 CPU (SQFP Type)
¥ Half-size ISA bus CPU card
¥ BIOS: AMI Flash BIOS
¥ Chipset: ALi M1489/M1487
¥ Level 2 cache: Onboard 128KB L2 cache
¥ DiskOnChip (SSD) up to 72MB
¥ Ethernet Interface (SBC-411E model): Supports 10Base-T, remote  
  boot ROM function, compatible with Novell NE 2000 driver

Specifications 

CPU 
BIOS
Chipset
Bus interface
System memory

Level 2 cache 
DMA channels
Interrupt levels
Enhanced IDE
FDD interface



AMD DX5-133 (SQFP Type)
AMI Flash BIOS
ALi M1487/M1489
ISA bus
1MB to 32MB. One 72-pin SIMM socket onboard supports BEDO, EDO, Fast Page DRAM.
Onboard 128KB L2 cache memory.
7
15
Supports IDE devices. Supports PIO mode 3/4.
Supports up to two floppy disk drives, 5.25Ó 
(360KB and 1.2MB) and/or 3.5Ó (720KB, 1.44MB 
and 2.88MB).


Parallel port

Serial ports

Keyboard
connector
Watchdog timer


Power management
Ethernet controller
(411E only)
Ethernet interface

SSD interface


PC/104 connector
Power supply 
voltage
Max. power
requirement
Operating 
temperature
Board size
Weight

Configured to LPT1, LPT2, LPT3 or disabled. Supports SPP, ECP, and EPP modes. 
Two RS-232 ports, Ports can be individually configured from COM1 to COM4 or disabled.
6-pin mini-DIN connector supports standard PC/AT keyboard. 
Can generate a system reset, IRQ15 or NMI. The time interval is software selectable (2 sec~128 min, 1 sec/step).
I/O Peripheral devices support power saving and doze/standby/suspend modes. APM 1.1 compliant.
Realtek RTL8029AS 10Base-T PCI-Bus Ethernet controller.
Novell NE 2000 compatible, software drivers available. Supports remote boot ROM function.
One 32-pin DIP socket supports M-Systems DiskOnChip 2000 series, memory capacity from 2MB to 72MB.
104-pin connector for a 16-bit bus.
+5V (4.75V to 5.25V)
+12V (11.4V to 12.6V)
+5V @ 3A

32¡ to 140¡F (0¡ to 60¡C)

7.3Ó (L) x 4.8Ó (W) (185 mm x 122 mm)
0.23 kg