*********************************************************************** WINDOWS NT DRIVER SETUP INFORMATION for Trident 93xx/944x/96xx Users *********************************************************************** Windows NT Device Drivers Version 0.03 Aug 28, 1996 *********************************************************************** Contents 1.0 Introduction 2.0 Supported Resolutions 3.0 Installation Notes for Windows NT Version 4.0 ***************************** 1.0 Introduction This Accelerate Driver runs on the following products: Trident 93xx/94xx/96xx, VESA or PCI local bus adapter The Graphics Device Drivers supplied here are for the Microsoft Windows NT operating system version 4.0. ***************************** 2.0 Supported Resolutions. 16 colors 256 colors 65000 colors 16.7 million Resolutions 4 bpp 8 bpp 16 bpp 24/32 bpp 640 x 480 1/2/4MB 1/2/4MB 1/2/4MB 1/2/4MB 800 x 600 1/2/4MB 1/2/4MB 1/2/4MB 2/4MB 1024 x 768 1/2/4MB 1/2/4MB 1/2/4MB 4MB 1280 x 1024 1/2/4MB 2/4MB 4MB NA 1600 x 1200 1/2/4MB 2/4MB(1) 4MB(2) NA 1/2/4MB - Supported on 1, 2 or 4 Megabyte Trident products NA - Not Supported (1) - 1600x1200x256 is supported on 2MB products w.o/acceleration, 4MB is required to accelerate this resolution. (2) - 1600x1200x64k is supported on 4MB products w.o/acceleration, currently it can not be accelerated due to memory limitation. NOTE: 1. 9440/9470 and 9320 only support 16 million colors at 640x480 without acceleration. Neither do they support 1600x1200 modes. 2. All 16 colors modes are supported via Microsoft's VGA driver without acceleration. 3. 9400/9420 do not have accelerator, all display are handled DIB engine. **************************** 3.0 Installation Notes for Windows NT This driver package containing: - TGIUL40.SYS (Trident linear addressing video miniport driver) - TGIUL40.DLL (Trident 256/64K/16M colors accelerated video display driver) - VGA.DLL (Microsoft VGA 16 colors video display driver) - OEMSETUP.INF (setup files used by Windows NT Setup program) - README (This README file for Windows NT Version 3.5) Procedure to install drivers: 1. Open Windows NT 4.0. 2. Click the START button (lower left hand corner of the screen). 3. Click on SETTINGS. 4. Click on CONTROL PANEL. 5. Double click on the DISPLAY icon. 6. Click the SETTINGS tab. 7. Click DISPLAY TYPE. 8. Click the CHANGE button under ADAPTER TYPE. 9. Click the button HAVE DISK. 10. Type the path to where the drivers are located (example A:\). 11. Click OK. 12. You will see one driver listed "Trident Video Accelerator" . Click OK to select it. 13. Click YES to continue. 14. Click OK to continue. 15. Click the CLOSE buttons. 16. Click YES when prompted to restart NT 4.0.