Push Install
                                                        1.00

Windows 95 Push Install Instructions for Intel's
EtherExpress(TM) PRO/100+ adapter
==========================================================

These instructions apply to push installs of Retail Windows 95,
Windows 95 w/ Service Pack 1, and Windows 95 OEM Service Pack 2 (OSR2).

Note: The network share Z:\PUSH is used here as an example path to the
      distribution folder.  The distribution folder is where the setup
      files for Win95 reside.  During the first step of the push install,
      the client will connect to the distribution folder with IPX or
      TCP/IP.

1.  Copy the Win95 setup folder from the CD to Z:\PUSH.  Use Explorer,
    Winfile or XCOPY in order to maintain the same directory structure
    as on the CD.

2.  From the "Intel EtherExpress(TM) PRO/100+ Lan Adapter Configuration
    and Drivers Diskette", copy the following files and directories into
    Z:\PUSH:

	A:\NET82557.INF			-->	Z:\PUSH\NET82557.INF
	A:\82557NDI.DLL			-->	Z:\PUSH\82557NDI.DLL
	A:\WIN95\PUSH\CUSTOM.INF	-->	Z:\PUSH\CUSTOM.INF
	A:\WIN95\PUSH\MSBATCH.INF	-->	Z:\PUSH\MSBATCH.INF
	A:\NT\*.*			-->	Z:\PUSH\NT\
	A:\NDIS\*.*			-->	Z:\PUSH\NDIS\
	A:\DOS\*.*			-->	Z:\PUSH\DOS\

4.  Connect the target client system to Z:\PUSH using IPX or TCP/IP.

5.  Run Windows 95 setup with the following command line switches:

	Z:\PUSH> SETUP /IS /IW

    For debugging purposes, include the additional switches to show
    each device class scanned for during PnP detection:

	Z:\PUSH> SETUP /IS /IW /P B;G=3